DIG ECO1 ASV.075, Инструкция по эксплуатации

Страница: 18 / 36

3. To set the desired first start time hour (note AM and PM designations), press
or .
4. Press and the minutes start blinking.
5. Press or and set the desired start time minutes.
6. Press again, the second start time and OFF (or the last start time
programmed) appear blinking.
7. To set the desired second start time hour (note AM and PM designations), press
or .
8. Press again and the minutes begin blinking, press or to select the
watering start time in minutes. Repeat the steps to set the third and if needed
the fourth and fifth start times. During programming, the screen also shows
which days the controller will operate.
Press the button to proceed to the next step RUN TIME or to review
the program.
18