4. Remove the cover and the Mini-Disk filter. Attach
1
⁄
8
″
micro tubing to
the outlet side (see Figure 4). If using
1
⁄
4
″
micro tubing, first connect
a
1
⁄
4
″
converter barb onto the
1
⁄
4
″
micro tubing (see Figure 5) and
then insert the converter barb into the outlet side of the TOP.
5. Use the rubber caps provided to close all unused
outlets. Do this by removing the cover and the
Mini-Disk filter. Press the rubber caps into the
unused outlets. Re-install the Mini-Disk filter
and cover. Tighten cover by hand.
6. Secure micro tubing near plants. If using more
than one outlet per plant, space each outlet
a minimum of 6-8
″
apart. Attach the plastic
stake to end of the micro tubing and add a bug plug at the end of micro tubing. A bug
plug prevents insects from crawling into the tubing, which they sometimes do to lay their
eggs. The bug plug will still allow water to trickle out for the plants.
NOTE: Bug plugs may be used only with
1
⁄
8
″
micro tubing. (see Figure 7)
7. Backfill all trenches.
3
Figure 5
Figure 4
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
