Diffraction SBIG STC-7, Руководство пользователя

Страница: 11 / 47

SBIG STC-7 CAMERA
USER’S MANUAL
11
4. Remove filters from their packaging one at a time and carefully insert them
into their required slots in the carousel. Try to avoid touching filter surfaces
by handling them only on their edges. The filter slots are each identified by
the number printed on the carousel.
The recommended order for installing the filters is as follows. If you use this
order, the default settings shown in MaxIm LT will be correct.
o
Slot 1: Luminance
o
Slot 2: Red
o
Slot 3: Green
o
Slot 4: Blue
o
Slot 5: Hydrogen-alpha
o
Slot 6: Sulphur-II
o
Slot 7: Oxygen-III
o
Slot 8: Dark (opaque filter for taking dark frames)
NOTE:
The dark filter MUST be in Slot 8.
5. Replace the filter retainer and secure it with the eight Allen screws you
removed in step 3.
6. Replace the filter wheel lid and secure it with the four Allen screws you
removed in step 2.
B. Cable connections
This procedure details the steps required to connect an STC-7 camera.
1. Install the ferrite snap-on chokes at convenient positions along both
the USB cable and the DC power cable, preferably close to the
camera ends of these cables. Open a choke and lay the cable into the
channel, then snap the choke halves together.
2. Attach the cabling:
CAUTION:
Never “hot plug” the cables into or from the units. Always
disconnect power before connecting or disconnecting any cables.