Diffraction SBIG STC-428-OEM, Руководство пользователя

Страница: 36 / 44

SBIG STC-428-OEM CAMERA
USER’S MANUAL
36
B-3 Updating the camera drivers and firmware
You should periodically check for updates to your camera’s drivers and
firmware to ensure the best possible performance. Diffraction Limited supplies
a software utility program named
DL Config that will update the firmware
elements in the camera via USB. This is a standalone version of the DL Config
form mentioned in Section 2.1 Connecting the STC Camera to MaxIm LT . The
program requires a PC with an internet connection and it can be freely
downloaded from the Diffraction Limited website at:
https://diffractionlimited.com/product/stc-428-oem/
Click the DOWNLOADS button for your specific camera. There you will find a
link to the latest version of the utility program. Download and run the
program. New drivers are automatically installed together with the
DL Config
utility. A firmware update is also automatically downloaded when you
download the utility, but this is not automatically installed. You can choose
whether or not to install this. All further instructions are accessible from the
application itself.
To update the camera firmware, proceed as follows:
1. Install the latest version of DL Config. This will also update your camera
drivers.
2. Power up your camera and connect to the computer (USB recommended),
but make sure it is not connected to MaxIm DL or other control software.
3. Go to Start menu > DL Config Utility and run the DL Config Utility.