Diffraction SBIG STC-428-OEM, Руководство пользователя

Страница: 13 / 44

SBIG STC-428-OEM CAMERA
USER’S MANUAL
13
2 - Operating the SBIG STC camera with MaxIm LT
The MaxIm LT application allows full configuration and control of the SBIG
STC-428 camera. Calibrating files, automating imaging sequences, logging,
and various image processing tasks can all be performed. Please note however
that since MaxIm LT and MaxIm DL both share the same Help file, not all
features detailed in that file will be enabled in MaxIm LT. Full feature access
requires MaxIm DL Pro.
The procedures in this chapter are intended as a basic introduction to
connecting and operating the STC hardware. Consult the Help file for further
information on specific parameters, detailed procedures, and various tutorials.
2.1 Connecting the STC Camera to MaxIm LT
The following is the basic MaxIm LT procedure used to configure and connect
to the STC camera. Launch the MaxIm LT application.
1. Click the Camera Control icon or press Ctrl-W to open the Camera
Control form and click the Setup tab.