32
33
DIETZ GmbH / Operating instructions standard wheelchair CANEO_B / Version 2.0.1. EN
06 TECHNICAL DATA
6. DIETZ’s measurement system
There is no standard procedure to measure up a wheelchair and different manufacturers take their
measurements in different ways. To avoid any mistakes all measurements are clearly defined in the
following pictures. All dimensions provided in this manual are taken according to this system.
Seat depth:
Total length of the seat tube front to back
Seat width:
Total width from outer edges of the seat tubes left to right
Back height:
Total height from seat upholstery to upper edge of back upholstery
Seat depth
Seat width
Back height
06 TECHNICAL DATA
Front seat height:
Total height from ground to front upper edge of the seat tube
Rear seat height:
Total height from ground to rear upper edge of the seat tube
Lower leg length:
Total length from foot plate (centre) to upper edge of the
leg rest acceptance
NOTE
All dimensions taken on textile
parts (e.g. back upholstery) are
to be understood with a toler-
ance of +/–1 cm.
Rear seat height
Lower leg length
Front seat height
