Diehl IZAR RDC STANDARD, Руководство по установке, Страница: 14 / 40

English
4. INSTRUCTIONS
The IZAR RDC STANDARD may only be installed
and taken into operation by qualified persons.
This also applies to service work during opera-
tion. Failure to observe these instructions creates a risk
of serious damage to health or danger to life through
electric shocks.
If equipment is defective, remove it from use
and contact the responsible customer support
team immediately. Examples of equipment faults
are a damaged housing or cable or liquid in the housing.
The relevant electrostatic discharge regulations
(ESD) must be observed. The housing must not
be opened. The equipment must be discon-
nected from the mains supply before connecting the
electrical supply and Ethernet (LAN) cables and inserting
the SIM card.
Electrical connection
Voltage 100 V to 240 V
Frequency 50 Hz to 60 Hz
Current Max. 100 mA (at 100 V)