DieHard 28.71341 Скачать руководство пользователя страница 9

 

9

 

MAINTAINING A BATTERY

The 28.71341 charges and maintains  

6 and 12 volt batteries, keeping them at 

full charge. 

NOTE:

 The maintain mode technology 

allows you to safely charge and maintain 

a healthy battery for extended periods of 

time. However, problems with the battery, 

electrical problems in the vehicle, improper 

connections or other unanticipated 

conditions could cause excessive current 

draws. As such, occasionally monitoring your 

battery and the charging process is required. 

FAN OPERATION

It is normal for the fan to be on all the 

time. Keep the area near the charger 

clear of obstructions to allow the fan to 

operate efficiently. 

BATTERY CHARGING TIMES

CCA

 = Cold Cranking Amps 

RC

 = Reserve Capacity 

Ah

 = Amp Hour 

BATTERY SIZE/RATING

CHARGE RATE/TIME

6A<>2A

SMALL BATTERIES

Motorcycle, garden tractor, etc.

6-12 Ah

1½-2½ h

12-32 Ah

2½-7 h

CARS AND TRUCKS

200-315 CCA

40-60 RC

7½-9½ h

315-550 CCA

60-85 RC

9½-12 h

550-1000 CCA

85-190 RC

12-23 h

MARINE/DEEP-CYCLE

80 RC

12 h

140 RC

18 h

160 RC

20 h

180 RC

22 h

Times are based on a 50% discharged battery and may change, depending on age  

and condition of battery.

12. MAINTENANCE AND CARE

A minimal amount of care can keep your 

battery charger working properly for years.

• 

Clean the clamps each time you are 

finished charging. Wipe off any battery 

fluid that may have come in contact with 

the clamps to prevent corrosion.

• 

Occasionally cleaning the case of the 

charger with a soft cloth will keep the 

finish shiny and help prevent corrosion.

• 

Coil the input and output cords neatly 

when storing the charger. This will help 

prevent accidental damage to the cords 

and charger.

• 

Store the charger unplugged from the AC 

power outlet in an upright position.  

• 

Store inside, in a cool, dry place. Store 

the clamps on their support posts, to 

ensure they do not come into contact 

with any metallic surface.

13. TROUBLESHOOTING AND ERROR CODES

Error Codes

ERROR  

CODE

DESCRIPTION

REASON/SOLUTION

F01

The battery voltage is still under 

10V (for a 12V battery) or 5V 

(for a 6V battery) after 2 hours of 

charging.

The battery could be bad. Have it checked or 

replaced.

F02

The charger cannot desulfate the 

battery.

The battery could not be desulfated; have it 

checked or replaced.

F03

The battery was unable to reach 

the “full charge” voltage.

May be caused by trying to charge a large battery or 

bank of batteries on too low of a current setting. Try 

again with a higher current setting or have the battery 

checked or replaced.

F04

The connections to the battery 

are reversed.

The battery is connected backwards. Unplug the 

charger and reverse the connections to the battery.

F05

The charger was unable to 

keep the battery fully charged in 

maintain mode.

The battery won’t hold a charge. May be caused 

by a drain on the battery or the battery could be 

bad. Make sure there are no loads on the battery. If 

there are remove them. If there are none, have the 

battery checked or replaced.

Содержание 28.71341











Отзывы: