2.
1
2 3
T o R e p l a c e t h e B a t t e r i e s
When
＂ ＂
displays on LCD, it indicates batteries are low and you need to replace them with new batteries.
Replacing Method:
Push and remove the battery compartment cover
according to Figure D. Take out the old batteries and
install the new ones properly into the compartment
as the polarity marks show. Put and push the compartment
cover into place.
Friendly Reminder:
If your Private Container will not be used for a long time, it is suggested that you remove
the batteries. When the batteries are placed back, the code will be still stored.
Compartment Cover
Removing&Replacing Direction
Figure D
T o B o l t D o w n t h e P r i v a t e C o n t a i n e r
Place the Private Container where it will be installed. Mark the locations of the bolt-down holes back
(or underside) of the Private Container, drill the holes, then install and tighten the bolts and nuts.
B u t t o n a n d L C D S c r e e n
Buttons
Function
The ten digital buttons from to are used to enter the combination.
The button is used to disable the combination display and clear the entered combination.
The button is used to confirm the entered combination.
1. If the prompt
＂
＂
highlighted, it indicates that changing the user
code is in process.
2. If the prompt
＂
＂
highlighted, it indicates that the electronic
combination lock is unlocked.
3. If the prompt
＂
＂
highlighted, it indicates that the batteries are
low and should be replaced with new ones.
If
＂—＂
displayed, it indicates that the keypad is under dead lock and
the code cannot be entered now.
If
＂
error 1
＂、＂
error 2
＂
and
＂
error 3
＂
displayed, it indicates that
an incorrect user code is entered once, twice and three times respectively.
T o A m e n d t h e E n t e r e d D i g i t s
If a wrong digit is entered when you are entering the user code, press the
＂
＂
button to clear the last digit entered
and continue to enter the right digits. Repeat pressing the
＂
＂
button to clear all digits entered one by one until no
digit is displayed on the LCD screen.
T o E n a b l e t h e S p y p r o o f F u n c t i o n
Press the
＂
＂
button before entering your user code, and the
＂—＂
prompt will be displayed on the LCD screen instead
of your user code. (After completion of one operation, this function will exit for next operation and the user code will be displayed
on the LCD screen again.)
Shanghai Diebold Security Equipment Co., Ltd.
Add. : 1188 Caobao Rd., Shanghai, 201102, P.R. China
Tel : 86-21-6480 1118 Fax : 86-21-6480 1238
Website: http:// www.diebold.cn
