14
UTD User Manual
EDGE_MUL=<acceleration multiplier for all edges>
(e.g.:
EDGE_MUL=1.5
)
Option 2 – settings per touch device
Please note, that the parameters have to be numbered with _1 und _2 and
not with _0 und _1.
EDGE_PER_DEVICE=(1|TRUE|ON|YES)
Set the following values (if desired) as described above:
EDGE_RANGE_V_1=
EDGE_RANGE_H_1=
EDGE_MUL_1=
EDGE_RANGE_V_2=
EDGE_RANGE_H_2=
EDGE_MUL_2=
Device selection settings
The daemon will try to find input queues that correspond to the sysfs paths
provided on the command line. If started via runcontrol script these are
the ones provided in
/etc/opt/wn/wntouch/devices
.
If there are less than two devices given in, it will try to find further sup-
portable devices connected to the system.
Please be aware that the devices given take up their respective slots even
if not connected to the system, thus modifying the order and gaps in the
numbering of emulated wntouch0 … wntouch7 devices.
In order to avoid devices not defined on the command line from being
supported, use the following setting:
STRICT_DEVICE_SELECTION=(1|TRUE|ON|YES)
Touch/Release delay settings
The touch/release delay will prevent short touches (in click-on-touch
mode) and releases (in click-on-release mode) to issue a click event.
The default setting for the delay is 50 msec.
The setting can be adjusted with the following parameter
TOUCH_DELAY=<touch/release delay [msec]>
(e.g.
TOUCH_DELAY=75
)
