DIEBOLD NIXDORF DN 490, Руководство оператора

Страница: 13 / 114

System Description
3.1.1
3.1.1 Before Performing Maintenance Procedures on the System
The operator should be familiar with the following information before performing maintenance proce-
dures:
• The features and equipment on your system
• The service options your institution has selected for its system(s)
Standard and Optional Equipment
The system might not have all the features described in this manual. Refer to the documents listed in
Appendix A for more information.
Maintenance Options
Verify which service option the institution has selected before servicing the system.
3.1.2
3.1.2 Device Usage
Table 3-1 lists the devices in the system and who would generally use them. Section 3.2 , Section 3.3 ,
and Section 3.4 contain a brief description of some of the devices.
The devices on the operator interface devices are used to perform routine service operations such as
daily balancing and replenishing supplies. These devices can also be used for occasional operations
such as setting up the system and diagnosing problems.
The operator maintenance interface for the system is the consumer display. The operator uses the but-
tons on the external control unit with the operator interface to perform routine maintenance procedures.
Copyright © 2021, Diebold Nixdorf
01750337284 C 3-3