Initial setup
8.2.2
8.2.2
Preparing the display
1
1
2
1.
Place a piece of protection sheet on a flat
surface e.g. a table.
2.
Lay the display face down on the protection
sheet.
3.
Tighten the two screws (1) half way through.
4.
Remove the cable cover (2) at the bottom of
the display by pushing it downward.
1
2
5.
Plug in cables (1) and (2).
1
6.
Place back the cable cover (1) at the bottom
of the display.
7.
Pull the cable through the opening of the ca-
ble cover.
Copyright © 2021, Diebold Nixdorf
01750351847A
8-2
