
3.4
Accessing the Rear Service Display
The rear service display is located on the upper chassis rear door (see
Figure 2-18). The display can be used to perform certain maintenance procedures.
Perform the following steps to access the rear service display.
NOTE
For information about operating the rear service display
to perform specific maintenance procedures, refer to the
Agilis 91x XV Maintenance Manual
(TP-820744-001I) or the
documentation for your terminal control software. Refer to
the
10.4-inch Open Frame LED Display (49-240457-000A)
with Optional Touch Screen On-site Repair Manual
(TM-000458-001A).
1. Open the upper chassis rear door. Refer to Section 3.2.1.
2. Pull down on the rear service display release latch and handle to free the
display from its closed position (see Figure 3-3).
3. Using the handle, turn the rear service display 180° counterclockwise
(one direction only). See Figure 3-5.
The rear service display is in operation position.
4. After the terminal maintenance is completed, swing the rear service
display around to its closed position. Make sure that the spring-loaded
release latch is securely latched.
NOTE
The upper chassis rear door will not close properly
unless the rear service display is returned to its closed
position.
5. Close the upper chassis rear door (refer to Section 3.2.2).
3-10
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (4/2020) - All Rights Reserved
TP-821811-001C