Dictaphone Walkbout Express, Руководство по эксплуатации

Страница: 5 / 37

3
WHERE TO GO FROM HERE
If you are taking the
Docking Station
and
Docking Station
PC Host
software out of the box for the first time, you will
need to complete the following tasks before sending voice
files for the first time. See the referenced pages for detailed
instructions.
1. Configure the host PC (or workstation) that will be
connected to the Docking Station unit by specifying
a parallel port setting. See PC Setup Instructions on
page 5.
2. Connect the Docking Station unit to the host PC and
power source. See Installing the Docking Station on
page 7.
3. Install the Docking Station PC Host software
application from the CD-ROM onto the host PC. See
Installing the Docking Station PC Host Software on
page 10.
4. After installation, the host PC is ready to receive
files. See Using the Docking Station To Upload
Voice Files on page 27.
If the Docking Station unit has been used before, see Using
the Docking Station PC Host Software on page 18, and
Using the Docking Station To Upload Voice Files on
page 27 for instructions on sending voice files.
To monitor the status of file transmission from the Docking
Station to the host PC, see Checking the Status of the
Docking Station on page 22
If you wish to change where the transmitted files are
stored, which port is used, or whether the
Docking Station
PC Host application starts automatically when the PC is
turned on, see Configuring the Docking Station PC Host
Software on page 20.
For troubleshooting instruction see page 33.
Wher
e to Go Fr
om Her
e
L-2475-000.book Page 3 Wednesday, February 23, 2000 9:38 AM