13
Additional Recor
d Operations
Voice-Activated Recording (VOX/VOF)
You can set the portable to record only when you are speaking. To
set voice-activated recording you must be in record.
1 Press NEW, and fill in the header IDs, if
you are not already in a recording.
2 Press the Record Bar (Slide Control) and
move it up until it latches into
Record lock.
The REC menu appears.
3 Press VOX to turn on voice-activated
recording.
The portable displays VOF to indicate VOX is on, VOX also
appears above the MEM indicator. During VOX, the record
indicator lights when you speak and goes off during silence.
4 Press VOF cancel voice-activated recording.
The VOF option changes to VOX.
Adjusting VOX Sensitivity
1 Press the Record Bar and move it up until it latches into
Record lock.
2 Press VOX and then ADJ.
The VOX sensitivity gauge appears.
Note. Dictation cannot be recorded when the portable is in VOX
ADJ mode.
3 Use the Thumb-wheel to adjust VOX sensitivity.
You can add up to 12 blocks to the VOX sensitivity gauge to
decreases the VOX sensitivity. The more blocks you add, the
louder you’ll have to speak to trigger record. Remove blocks as
needed to adjust VOX to your normal speaking voice.)
Note: If VOX is always recording, even during silence, then
decrease its sensitivity by adding blocks to the gauge.
4 Press the Thumb-wheel set your adjustment.
