First Steps
Copyright © 2014 DICOTA/ All rights reserved.
5
Troubleshooting
What to do if…
the yellow light does not start blinking when you power on the
tracer.
Answer:
The battery is likely to be empty. Recharge it through the
mini-USB connector.
the red light blinks slowly.
Answer:
The battery is almost empty and the tracer cannot connect to
the GSM-network anymore. Recharge it through the mini-USB
connector.
the red light blinks quickly.
Answer:
The tracer has detected a hardware problem and needs to be
replaced.
the PC reports that no driver could be found for the device after
connecting the USB-cable.
Answer:
Ignore this message. The USB-cable is only used for charging
and needs no driver.
the green or yellow light is blinking every second while the
battery charging is active.
Answer:
The tracer is trying to connect to the GSM-network. The
charging pattern will be shown again when this is finished.
