Dicon VX500, Руководство по эксплуатации

Страница: 14 / 24

91500 Revision B
14 DiCon Fiberoptics VX500 Fiberoptic Switch
To select the output channel of a 2
×
N blocking switch with up to 16 output channels, set the
five channel address inputs (<D4:D0>) and the RESET input as indicated in Table 5, then
strobe the device.
Maintaining Channel Position
To maintain channel position, keep the STROBE signal high and do not interrupt supply
power.
Table 5: Control Codes For 2
×
N Blocking Configurations
RESET D4 D3 D2 D1 D0
Common 1
Output Channel Common 2
Output Channel
0 x x x x x 0 reset -1 reset
1 0 0 0 0 0 1 0 block
1 0 0 0 0 1 block 1
1 0 0 0 1 0 2 block
1 0 0 0 1 1 block 2
1 0 0 1 0 0 3 block
1 0 0 1 0 1 block 3
1 0 0 1 1 0 4 block
1 0 0 1 1 1 block 4
1 0 1 0 0 0 5 block
1 0 1 0 0 1 block 5
1 0 1 0 1 0 6 block
1 0 1 0 1 1 block 6
1 0 1 1 0 0 7 block
1 0 1 1 0 1 block 7
1 0 1 1 1 0 8 block
1 0 1 1 1 1 block 8
1 1 0 0 0 0 9 block
1 1 0 0 0 1 block 9
1 1 0 0 1 0 10 block
1 1 0 0 1 1 block 10
1 1 0 1 0 0 11 block
1 1 0 1 0 1 block 11
1 1 0 1 1 0 12 block
1 1 0 1 1 1 block 12
1 1 1 0 0 0 13 block
1 1 1 0 0 1 block 13
1 1 1 0 1 0 14 block
1 1 1 0 1 1 block 14
1 1 1 1 0 0 15 block
1 1 1 1 0 1 block 15
1 1 1 1 1 0 16 block
1 1 1 1 1 1 block 16