Replacing the battery
Battery Type
DL123 Lithium battery, Quantity 1
If the battery is low:
Removing the battery will cause the logger to take
a dummy reading of -42 PSI to mark the point where
logging was resumed once the battery was replaced.
If battery loses power before being replaced:
The logger will resume logging once the battery is
replaced, but all readings before power loss will be
off. A dummy reading of -42 PSI marks the point where
logging was resumed once the battery was replaced
Note:
The logger can not be turned “on” or “off”. If
decommissioning a logger, remove battery.
IP Rating:
This logger has an IP rating of 68 and has maintained
the IP68 rating in up to 50 meters of water. A silicone
lubricant must be applied to the cap O-ring in order to
achieve these results.
Dickson Warranty
This warranty does not cover routine calibration and
battery replacement.
For
Specifications
and
Technical Support
go to
www.DicksonData.com
.
Dickson warrants this line of instrument will be free from
defects in material and workmanship under normal use and
service for a period of twelve months after delivery.
www.DicksonData.com
930 South Westwood Avenue • Addison, IL 60101-4917
Telephone:
630.543.3747 •
Fax:
630.543.0498 •
E-mail:
