Igniter
The electrode for the igniter has already been installed for you. Simply plug the end of
the wire into the igniter button assembly and screw the assembly bracket to the left deck
leg . (See Diagram)
•
Attach igniter bracket to base assembly with 2 3/8” screws
•
Push the igniter body, electrode end first, into the bracket. It will click into place.
•
Attach electrode to lead wire
Igniters seldom fail but if yours stops working try cleaning the probe. Built up grease
may have coated the probe, preventing the spark.
Burner Orifice
The orifice has a tiny hole in the burner that controls the maximum amount of fuel into
the burner. From time to time salt or other debri may plug the hole changing the flame
and / or the sea-b-que will not get hot, and a blocked orifice may be the reason. To clean
the orifice in the burner remove the grills and unscrew the flame spreader (top of burner)
counterclockwise. Now remove the 2 very small screws to take off the burner top cap.
Use a small metric socket to unscrew and remove the orifice. Clean with a very small
wire like the kind in a (twist tie) (actual size .031 dia). Do not expand the hole or the
sea-b-que will get too hot. Assemble in reverse order.
Mounting
Important Note:
Barbecues get hot and will splash, leak grease, and for
safety reasons it is therefore advisable to mount the unit outboard.
Optional Mounting
#15-150A Universal Rail Mount Kit
#15-150F Fishing Rod Holder Mount Kit
#15-187 Taff Rail Mount Kit
#15-150P Scotty Mount Kit
Visit
www.dickinsonmarine.com
for pics and details
