7
BLOW OUT FUEL LINE PRIOR TO ATTACHING TO THE PROPANE SUPPLY AND
THE APPLIANCE OR TAPE OVER THE FITTING WHEN INSTALLING THE FUEL
LINE SO NO DEBRI WILL ENTER.
PORTABLE PROPANE BOTTLE
If you do not have a low pressure propane system on board and intend to use a
portable propane bottle it is necessary to install a pressure regulator for gas
supplied from the propane bottle. For this type of installation we suggest using a
Dickinson Low Pressure Kit (Part No. 19-150) This Kit includes a pressure
regulator (11 ins W/C), a hose or 1lb bottle connector fitting and a mounting kit.
The Kit must be mounted outside and away from a hatch or entry. A Dickinson
AGA/CGA propane hose can be used to connect this Kit to the heater. These are
available in 10 ft ( 3m) (Part No. 19-100-10) or 20 ft (6m)(Part No. 19-100-20)
AFTER GAS HOOK-UP AND BEFORE LIGHTING THE APPLIANCE
TEST ALL GAS CONNECTIONS FOR LEAKS WITH A SOAP SOLUTION
TYPICAL LPG ON-BOARD SYSTEM
