Dick SM-200 TE, Руководство по эксплуатации, Страница: 40 / 76

SM-200 TE Grinding and Honing Machine 40
Setting up the Machine
8
Changing the grinding radius:
1 Remove the screws [2] .
2 Remove the clamping piece [1] with the universal mounting
head from the grinding arm.
3 Remove the plugs from the holes on the back of the grinding arm.
4 Use the screws to fasten the clamping piece [1] with the uni-
versal mounting head on the grinding arm.
5 Use the plugs to block the holes on the front of the grinding arm.
8.8 Setting the radial grinding arm
The radial grinding arm provides a range of settings for grinding
round cutting edge shapes. The radial grinding arm positions the
universal mounting head in different positions in the direction of the
grinding plate. The rotary function of the universal mounting head
is required for the grinding tasks.
Grinding radius/distance Position on the universal grinding
arm
< 260 mm Front
> 260 mm Back
Figure 8.7 – Setting the grinding radius
[1] Clamping piece
[2] Screws
2
1