DiCiTi AURA 4, Инструкция по эксплуатации

Страница: 15 / 36

EN
15
Pic.3 SLIM Pic.4 SLIM -02
Pic.5 STANDARD Pic.6 STANDARD-02
BREEZE / PARUS / RIO (Pic. 7-10)
•
remove the decorative front panel and terminal block cover
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
•install the cover of terminal block and front panel by easy pressure
Pic.7 BREEZE / RIO Pic.8 BREEZE-02 / RIO-02
Pic.9 PARUS / PRO Pic.10 PARUS -02
1
2
cover
of terminal block
2
1
S3
cover
of terminal
block
PRO (Pic. 9, 11)
• remove the terminal block cover;
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end insert wires into terminal box X and
press them by tap screw;
• fix the wires by means of cable clamp 2;
•install the cover of terminal block.
•Install brackets of holders;
•Install first couple of covers in brackets ;
•Install the fan ;
•Butt airvents from two sides to the fan case
•Fix the fan case with airvents by means of another couple of covers.
Pic.11 PRO
fun
duct
connection
duct
connection
cover
cover bracket