DICE iPod AUX Interface, Руководство по установке

Страница: 11 / 20

Installation instructions
11
Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise
caution when removing trims as they may break. The interface unit
should be placed at an accessible location, such as in
the glove box, the center console or under the front seat.
1 Pull vehicle into service bay.
2 Make sure that the radio code is available before disconnecting battery. Disconnect both battery terminals. These cables
must be disconnected during installation to ensure proper initialization of the module when it is connected.
3 Pull out the radio by removing surrounding trims and screws to access the radio's auxiliary input connectors. Most
trims can be removed by carefully pulling on the piece or using trim removal tools. Trim is usually held in place by snap-in
clips. Consult your dealership if additional information is needed on removing the radio.