EN
TEChnICal InFo
DiBO 22
Technical info
GENERAL
In this chapter you find the most important technical data of the range where
your machine belongs. Machine statement See end of book
GENERAL DATA
• Maximum reactive force of the sprinklers
: <60n
• Minimum water pressure (at LP entrance)
: 200 kpa (2 bar)
• Maximum water pressure (at LP entrance)
: 300 kpa (3 bar)
• Minimum water temperature
: 1 °C
• Maximum water temperature:
see
• Sufficient water supply at drinking water quality (Directive 98/83/EG)
• The use of an extra water filter is recommended
ACCESSORIES
1 x user manual
VIBRATION MEASUREMENT (HAND/ARM) - ROTATING HEAD
as previously mentioned, when using the rotating head of the cleaner (note: not
all cleaners have a lance with rotating head), the action values will be reached
sooner. Below, a table is mentioned with the vibration intensity and exposure
time (in hours) of the lances with rotating head on a weekly basis.
The measurements were carried out in the capacity of an accredited laboratory.
This measurements were carried out according to the Royal Decree of 7 July
2005 and En-ISo 5349:1.
TYPE
VIBRATION
INTENSITY
(AEQSUM)
EXPOSURE
TIME (ACTION)
ON WEEKLY
BASE
EXPOSURE
TIME (LIMIT) ON
WEEKLY BASE
ECn-M 110/13
6.0 m/s²
7 h
28 h
ECn-M 160/16
0.3 m/s²
+ 40 h
+ 40 h
ECn-M/T 160/22
9.3 m/s²
2.52 h
11.31 h
ECn-M/T 160/30
5.5 m/s²
8.20 h
33 h
ECn-M 220/16
8.9 m/s²
3.1 h
12.42 h
ECn-M/T 220/22
10 m/s²
2.3 h
10 h
ECn-T 220/30
5.6 m/s²
8.04 h
32 h
ECn-M 260/16
8.9 m/s²
3.1 h
12.42 h
ECn-T 260/22
9.8 m/s²
2.5 h
10.11 h
ECn-T 320/18
0.3 m/s²
+ 40 h
+ 40 h
Note: the version with reel reduces the vibration exposure time.
Increasing the water temperature (for ex.: through the
hotbox) does not raises the vibration exposure time.
