196 Coolidge Av. Englewood, N.J. 07631
Tel. : 1-201-871-8787 Fax : 1-201-871-8908
Website : www.dibipack.com - Email : [email protected]
BABYPACK 1217
4
UNPACKING AND INSTALLATION
Assembly of the machine stand (optional)
See table in the “Spare Parts” section:
- Screw the casters onto the lower platform and tighten well.
- Connect the two angled uprights by means of the stiffening crossbar.
- Secure the entire structure to the lower platform.
- Assemble the upper platform on the centre of the trolley so that the overhang of the platform is greater to the back
(opposite side to the perforated bin).
- Insert the perforated door in the open space between the angled uprights (front side).
BABY PACK 1217 Wrapping Machine
-Remove the machine from the packaging, holding it by the front and back sides; do not hold it by the handle of the
hood or the film holder unit (it is advisable to use two people for this operation).
-Rest it on the platform of the stand, checking that the feet of the latter are correctly positioned in the appropriate
spaces.
-If a support stand is not available, rest the machine on suitably sized work top with a level minimal height 80 cm / 32’’,
smooth and dry surface capable of supporting the weight of the machine (35 kg / 77lb.).
- Release the transparent hood by removing the sticky tape or the support; remove the bag containing the spare parts
and the manual and check that the Gride is correctly positioned.
-The transparent hood must be left open!
Note: For US version only
Anchor the machine to the stand by replacing one of
the feet with the anchorage screws and nuts supplied.
1. Transparent hood
2. Gride
3. Machine body
4. Supporting foot
5. Upper platform
6. Angled uprights
7. Pierced door
8. Lower platform
3
5
1
2
3
4
4
5
6
7
8
