9
10
Start cleaning
●
Press the START button on the vacuum
cleaner or the ON/OFF button on the
remote control to start cleaning.
●
Before starting cleaning, make sure the
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
●
The START button doesn’t have light in
sleeping mode. It turns yellow in standby
mode and turns green when working.
Product Operation
Stop cleaning
●
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
●
After stopping it, the START button will turn yellow. And it will turn to sleeping
mode if there is no operation in 30 seconds.
Sleeping
●
When in sleeping mode, press the START or ON/OFF button can wake it up.
●
When in standby mode, long press the START button to turn to sleeping mode.
●
When in standby mode, the vacuum will turn to sleeping mode if there is no
operation in 30 seconds.
Product Operation
●
Cleaning Modes
Cleaning paths
●
This vacuum has several cleaning paths, which can automatically switch according
to different surface types.
●
The default mode when starting the vacuum is Auto mode. And it will switch the 4
cleaning paths automatically depending on different floor types.
Spot cleaning
●
In standby mode, press the button on the remote control and the vacuum will
turn to spot cleaning mode.
●
This mode is suitable for cleaning at a dirtier area. The vacuum will spiral intensively
until it finishes cleaning the dirty spot.
Scheduling
●
In standby mode, press the PLAN button to set the scheduling time
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
●
When the battery is low, press the button on the vacuum or the button on
the remote control to make it go for recharging.
●
When it is working and the battery is low, the vacuum will automatically go back to
the charging base for recharging.
Auto cleaning path
Zig-zag cleaning path
Edge cleaning path
V cleaning path
●
Scheduling setting
Please use the remote control to set the scheduling. Once successfully scheduled, the
vacuum will clean at a certain time every day.
Before setting the time, make sure the START button is green. If the vacuum is in
standby mode, press the START button to wake it up first.
Set the clock time
Press the CLOCK button, and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the CLOCK button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
