diamondcoretools.com
|
info
@
diamondcoretools.com
8
1
Unplug the GFCI power cord
from the electrical outlet.
2
Disconnect both disconnects.
3
Remove the 6.5-gal. bucket and lid.
4
Remove filter bag by pushing
up, then tilt at an angle and
pull off sideways.
5
Clean filter bag and put back on
filter head. Pour water from bucket
and dispose of clay sediment.
6
7
Make sure lid is seated
properly and tight.
8
Slide the bucket back on the cart.
Rotate the bucket so that the elbow
connector in the center is facing
toward the 5-gal. bucket.
9
Reconnect both disconnects.
Reinstall the filter bag in the reverse
order it was taken off. Refill bucket up
to the fill line before reassembly.
MAINTENANCE
Emptying the 6.5-Gallon Filtered Sediment Bucket and Cleaning the Filter Bag
The filter bag in the 6.5-gallon filtered sediment bucket is designed to stop particles and debris that are not settled
out in the 5-gallon clay collection bucket
(
smaller bucket
)
. This filter can usually be cleaned instead of replaced. The
sediment level in the bottom of the 6.5-gallon bucket should not be allowed to get above 1 inch thick.
To empty the 6.5-gallon filtered sediment bucket and clean the filter bag:
Содержание CINK
Страница 1: ...The CINK User Manual...
