
8
3
4
2
Parts
B-14
,
B-16
,
B-19
,
B-19
,
B-20
&
B-21
will arive from the factory pre-assembled in the
carton. Disassemble by removing bolts
B-14
and
B-21
from parts
B-16
,
B-19
&
B-20
.
Gather the left
(B-19)
and right (
B-20
) lower
console mast covers and bring together as a
clamshell over the console mast/main frame
union. Align covers with the mounting holes
and loosely thread the four (4) hex bolts
B-21
into place. Do not tighten yet.
Positon the lower console mast front cover
(
B-16
) in place and thread the four (4) hex
bolts (
B-14
) through the face and into parts
B-19
and
B-20
. Do not over-tighten.
Align and tighten all bolts. Do not over-tighten.
B-19
B-21
B-20
B-14
B-16
G-14
G-1
G-15
G-R
H-R
H-L
G-L
B-27
B-26
B-33
H-L
H-R
B-25
Parts
B-33
,
B-27
,
B-26
&
B-25
will arive from the factory
pre-assembled on the console
mast. Remove all components
except
B-25
and set aside.
Slide the left (
H-L
) and right
(
H-R
) handlebar assemblies
over the upper pivot. The fit is
designed to be tight so proper
alignment is necessary for
installation.
Re-install washers
B-26,
pivot
caps
B-27
and fixing bolts
B-33
. Tighten bolt
B-33
firmly.
The forward pivots of steparm
G-L
&
G-R
will arive from the factory with
parts
G-15
,
G-1
&
G-14
pre-installed.
Remove bolts
G-14
, pivot caps
G-1
&
washers
G-15
from the steparms
and
set aside.
Bring the pivots of the left step arm
(
G-L
) and handlebar (
H-L
) together,
sliding the handlebar pivot over the
step arm pivot axle and press into
place.
Re-install washer
G-15
, pivot cap
G-1
and fixing bolt
G-14
. Tighten firmly.
Repeat for right-hand side.