910Ic Owner’s Manual
11
•
Attach handlebar (
B
) to the underside of the stem
assembly (
B-21
) with the two (2) stem fixing bolts
(
H-4
), two (2) lock washers (
H-5
) and two (2) flat
washers (
H-6
). Make the final angle adjustment
before fixing the bolts firmly.
•
Attach the water bottle cage assembly (
B-15
) to the
underside of the stem assembly (
B-21
) with the
three (3) Phillips fixing screws (
B-13
). Thread all
screws into place loosely before performing final
tightening.
•
Remove the four console fixing screws (
A-1
) from the back
of the console (
A
) and set them aside.
•
Plug the upper wire harness connector (
B-17
) into the back
of the console (
A
). Make sure the connection is complete.
•
Position the console above the mounting plate located on
the top on the stem assembly (
B-21
). Reinstall the four (4)
fixing screws (
A-1
) through the underside of the plate and
into the console. Tighten the four screws only after all four
have been started by hand.
Содержание 910IC
