PCI Express Hybrid ATSC/QAM X8550A V1.3.08002.02101
4
Installation of the PCI Express device
To install the
Hybrid ATSC/QAM HD 750PEC
PCI Express board make certain that the computer is
turned off. Precede the following steps to install the PCI Express card into your PC system:
1. Turn off the PC.
2. Open the case of your computer to expose the PCI Express slots.
3. Now you have to choose a free PCI Express slot. If possible choose a different slot than the slot
next to your AGP connector.
4. Unscrew the metal dust protector of the slot you have chosen.
5. Put the Hybrid ATSC/QAM HD 750PEC board into the PCI E slot.
Figure 2.1: Inserting the DTV board into a PCI EXPRESS slot
6. Tighten the screw on the
Hybrid ATSC/QAM HD 750PEC
board.
7. Repeat the steps 3 to 6 for any additional PCI Express card you want to install.
8. Close the case of your computer case.
Your Hybrid ATSC/QAM HD 750PEC hardware is installed now.
Installing the driver and software
Summary
In this chapter the installation of Hybrid ATSC/QAM HD 750PEC PCI EXPRESS is exemplary
described for the operating system Windows XP Professional Service Pack 2. The installation for
the other operating systems as Windows 2000 is similar. z
Install the driver
Turn on the PC. Insert the install CD to CD ROM. Then plug the HD 750PEC into one of the
PCI E port:
Step1:
When you start your computer for the first time after installing the Hybrid ATSC/QAM HD
750PEC PCI Express card, the message “
Found New Hardware
” appears.
Please choose
“
Cancel
”.
