PAN
The PAN control acts like a mixing board panner and pans the PAN IN input signal be-
tween the L OUT and R OUT outputs. PAN IN signal IS NOT sent to the L BYP output.
SWITCHES
PHASE
This switches the relative phase of the right channel to the left, with green on the LED
indicating 0 deg relative phase and red indicating 180 deg relative phase.
ISOLATION
A small internal slide switch can be set for the right channel isolation transformer ‘in’ or
‘out’ of operation. This is factory set to the ‘in’ position with the transformer providing
ground isolation of the right channel. For some setups, it may be desired to bypass the
transformer and have identical left and right signal paths from input to output, but since
the transformer also does second duty for phase inversions, the 180 deg phase footswitch
will not flip right channel output phase even though the LED will continue to change
color.
POWERING
Take the positive tip power adapter plug normally connected directly to the Memory
Lane (whether using the Memory Lane’s provided 24VDC adapter, or a custom cable
used with pedal power supplies providing between 18 and 24VDC), and connect it in-
stead to any one of the two power jacks on the ST-MIX. Then, using the provided patch
cable, connect the remaining power jack on the ST-MIX to the DC input on the Memory
Lane.
!
ST-MIX user manual v1.00
!
5
