background image

Stopping the appliance 

Set each control knob (n°3 on picture) on 0: the green pilot light (n°1 on picture) 

switches off. The appliance is no longer functioning. 

Let the device cool. 
Disconnect the power cable. 
Clean the appliance. (see 6. Cleaning) 

d) Breakdown / repair:

In  case  of  breakdown  or  of  damaged  part,  please  call  your  after-sales  service  and 
confide any technical operation to qualified person. 

When you contact the after-sales service of your distributor or your store, give him the 
complete reference  of  your device (commercial name, type and serial number). This 
information appears on the visible descriptive plate behind the device. 

6 CLEANING AND MAINTENANCE 

Disconnect the device. 

The plate is still hot: 

-  Drain  most  of  the  fats  and  cooking  juice  with  the  wooden  spatula  towards  the 

outlet (n°4 on picture) in front of the plate. 

- Let the plate cool down and clean it with warm soapy water and a slightly abra-

sive pad. Collect the cooking residues in the drip tray (n°5 on picture).

 

- Then use some white vinegar to neutralize the cooking smells and to give back 

brightness to the plate. 

- Finally, wipe the plate before putting it away or using it again. 

Do not put ice cubes or other on the plate that is still hot (deglazing), which may 
lead to a violent thermal shock, permanent damage and coloration of the plate. 

 

The plate is cold: 

- Clean the plate with a wet sponge and some

 

dishwashing liquid. 

 

- Wipe the plate with a soft and clean cloth. 
- Remove and empty the tray (n°5 on picture) filled with fats and cooking juice. 
- Clean the tray (n°5 on picture) with a wet sponge and some dishwashing liquid 

(can also be washed in a machine) and wipe. 

- After the tray (n°5 on picture) dries, put it back in the appliance. 
- Clean the outer case of the appliance without using any abrasive product. 
- Never clean the appliance under a water jet, the seepage may cause irreparable 

damage to the appliance. 

- Never immerse the appliance, cord or plug in water or any other liquid to avoid 

any electric shock.

 

Содержание PSR 400 EE

















Отзывы: