This manual provides installation, safety, and operating
instructions for Glo-Ray Strip Heaters. Hatco recommends all
installation, operating, and safety instructions appearing in this
manual be read prior to installation or operation of a unit.
Safety information that appears in this manual is identified by
the following signal word panels:
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
NOTICE
CAUTION
WARNING
INTRODUCTION
Glo-Ray
®
Infrared Strip Heaters ensure maximum food holding
time and minimize the risk of food-borne illness. Optimum
safety and quality is the result of food held at the proper serving
temperatures using Glo-Ray’s pre-focused heat patterns. The
pre-focused heat pattern prevents foods from being over-cooked
in the middle and cooling off around the edges by concentrating
higher temperatures to the outer edges of holding surfaces
where heat loss is the greatest. Utilizing specially designed
reflectors to direct the heat from the element, Glo-Ray Strip
Heaters safely maintain peak serving temperatures longer
without cooking the food beyond the point of excellence.
Glo-Ray Infrared Strip Heaters are available from the factory with
or without shatter-resistant incandescent lights to illuminate the
warming area. These bulbs have a special coating that guards
against injury and food contamination in the event of breakage.
Glo-Ray Infrared Strip Heaters are products of extensive
research and field testing. The materials used were selected
for maximum durability, attractive appearance and optimum
performance. Every unit is inspected and tested thoroughly
prior to shipment.
Important Owner Information ..............................................2
Introduction...........................................................................2
Important Safety Information...............................................3
Model Description.................................................................4
Model Designation................................................................4
Specifications .......................................................................5
Plug Configurations ............................................................5
Electrical Rating Chart........................................................5
Dimensions.......................................................................17
Installation...........................................................................18
General.............................................................................18
Recommended Mounting Heights ....................................19
Minimum Clearance Requirements for Combustible
Surroundings .................................................................19
Minimum Clearance Requirements for
Non-Combustible Surroundings ....................................20
Installing Portable Units....................................................21
Installing Chain Suspended Units ....................................22
Installing Permanent Units ...............................................23
Electrical Information........................................................25
Operation.............................................................................26
General.............................................................................26
Maintenance ........................................................................27
General.............................................................................27
Cleaning ...........................................................................27
Replacing a Display Light .................................................27
Troubleshooting Guide ......................................................28
Options and Accessories...................................................28
International Limited Warranty ..........................................30
Service Information ............................................................30
IMPORTANT OWNER INFORMATION
Record the model number, serial number (specification label
located on the side of the unit), voltage, and purchase date of
the unit in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ________________________________________
Serial No. ________________________________________
Voltage __________________________________________
Date of Purchase __________________________________
2
Form No. GRCEM1-0611
CONTENTS
Содержание GLO-RAY GR series
Страница 1: ...Mod RHD14 Production code GRAH 54 08 2013 ...