INSTRUCTION MANUAL FOR DISHWASHERS
Page 7 of 10
UK
4.4.2 Hood dishwashers
Select the washing cycle suited to the type of dishes using
PROGRAMME SELECTION (3)
; with
the button pressed, the shorter cycle is enabled
(Fig. 4)
.
Press
START (3)
for automatic start
(Fig. 6)
.
Lower the hood, the cycle starts automatically and the
CYCLE UNDERWAY (5)
led starts to flash.
When the cycle is completed the
CYCLE UNDERWAY (5)
led goes off.
The next cycles come on simply by lowering the hood.
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
To stop a wash cycle early, press
START
(3)
.
4.5
Removing the integral filter
Move the washing and rinsing arms at right angles to the edge of the door (
Fig.7
).
Lift each semi-filter by the relative handle.
4.6
Emptying the dishwasher
4.6.1 Appliances with no drain pump
Switch the dishwasher off.
If present, remove the integral filter (
Fig.7 A
).
Pull up and remove the overflow pipe (
Fig. 8 B
).
Wait for the tub to empty completely.
If necessary, extract the tub filter and clean (
Fig. 8 C
).
4.6.2 Appliances with drain cycle (*optional)
Switch the dishwasher off.
If present, remove the integral filter (
Fig.7 A
).
Withdraw the overflow, if present, by pulling it upwards (
Fig.9
); the overflow is not present on partial
drain versions.
Close the door.
Press the
DRAIN (2)
button for a few seconds to start the cycle;
The drain cycle is shown by the
POWER (5)
led coming on and the
CYCLE UNDERWAY (6)
led
flashing.
The machine runs a drain cycle and then switches off.
If necessary, extract the tub filter and clean (
Fig. 8 C
).
4.7
Turning the dishwasher off
Press the
ON/OFF button (1)
, the
POWER LED (5)
will continue to flash indicating that power is
being supplied.
4.8
Resin regeneration (*optional)
In machines with internal water softener, a regeneration cycle should be run periodically to ensure the
correct operation of the softener. The number of cycles between one resin regeneration and the next
depends on the hardness of the local water, and should be set in accordance with the following table.
dH °F N°
Cicli
dH °F N°
Cicli
6
10
160
13
23
90
7
12
150
14
25
80
8
14
140
15
27
70
9
16
130
16
29
60
10
18
120
17
30
50
11
20
110
18
32
40
12
21
100
19
34
30
Содержание DK7/6
Страница 1: ...Mod DK7 6 Production code ST3800BE 08 2017 ...
Страница 2: ...INSTRUCTION MANUAL FOR DISHWASHERS DE FR UK IT 4424 1 r 0 ...
Страница 3: ...Fig 3 OK Fig 6 OK A B C Fig 8 Fig 7 START Fig 4 START END END Fig 5 Fig 1 Fig 2 START 5 6 7 OK ...
Страница 4: ...Fig 9 Fig 11 Fig 10 R M 215034 20 06 2013 B 250 300g START 5s OFF OFF OFF OFF 5s OFF OFF START ...
