5
•
only original spare parts can be used for repairs
•
the product can not be cleaned by the watter jet or pressure shower
•
by damage or break down disconnect all the feeders (watter, gas, electricity) and call
proffesional service
•
producer refusses any responsibility in case of damages caused by wrong instalation,
by disobserving of above mentioned recommendations or by other use etc.
INSTALATION
Can be used ONLY by specialized technicians Following instructions apply to the technician
specialized in instalation to do all the operations in the most correct way and according to the
valid standards.
Important:
Any activity connected with regulation etc. must be done only when the device
is disconnected from electricity. If it is necessary to have the device connected to the
electricity (during repairs) you must be very careful.
PLACEMENT
The device must be instalated in well ventilated room what is necessary for regulation of the
function of the device (technician must go by valid standard ( SN....). If the device is situated
close to the wall or if it is in contact with the furniture walls, these walls must resist the
temperatures ranging to 60°C. Instalation, setting, putting into operation must be done by
qualified person who is competent for this and according to the valid standards.
Wrap up the device and check whether it was not damaged during transport. Settle the device
on horizontal surface (max imbalance 2°).Settle the device under the fumehood to eliminate
water steam and bad smell.The device can be instalated separately or in a set with devices of
our production. Min. distance 10 cm from other subjects must be kept.It is also necessary to
prevent our product from contact with combustible materials. In this case you must make
corresponding changes to secure heat izolation of combustible parts.Safety measures from the
standpoint of the fire protection according to SN 061008 l. 21:
SAFETY MEASURES FROM THE STANDPOINT OF THE FIRE PROTECTION
ACCORDING TO SN 061008 L. 21
•
only adults can operate the device
•
device must be safely used in common surroundings according to SN 332000-1
•
device must be placed so as to stand or hang on the noncombustible surface
No subjects from combustible materials can be placed directly on the device or in distance
which is shorter than safety distance (the shortest distance is 10 cm).
•
safety distances from various materials of different degree of combustion and
information about the degree of comb. of common building materials - see chart:
SAFETY MEASURES FROM THE STANDPOINT OF THE FIRE PROTECTION
ACCORDING TO SN 061008 L. 21
