Step 4 Preparation
This product is normally fitted directly onto the floor.Once the position has been
decided mark out and cut the plinth to the dimensions as shown below
decided, mark out and cut the plinth to the dimensions as shown below.
A
B
3203
320mm
100 mm
A= Width of cutout
B= Height of cutout
• Floor mounting
• Plinth mounting
Step 5 Water Connections
Fit the valve end of the flexible hoses to the Plinth Heater and the other ends to the
central heating flow and return pipe work. Note the direction of flow arrows on the valves
are not important in this application
System
y
pipe work
Flexible
hoses
Isolating
Valves
2
