Diamond ASD/50 Series, Руководство пользователя

Страница: 12 / 36

11
3.- ELECTRICAL CONNECTION
Â
AVOID ALL ACCIDENTAL GROUND STARTING. Before
connecting the machine, verify that all elements of machine
is good placed, otherwise it could cause a mishap.
Â
CHECK THAT VOLTEGE OF ELECTRIC NETWORK is the
same of identification foil of machine.
Â
CONNETION INSTALATION should possess differential
protection and own thermal magneto, also protected
upstream.
Â
NO START MACHINE IF ELECTRIC CABLE OR PLUG
ARE DAMAGED.
Â
CONECT PLUG to the electric network (220 V – 230 V)
4.- ON AND OFF
off on
•
Check that all elements of machine are in good position and that
machine’s plug is connected to electric network of (220 V – 230
V).
•
The switch is located in a right lateral of the machine, to proceed to
the ground starting you presses the switch such a form that the
circulate is in the area that stands out. (FIG. 1)
•
For stop machine, presses the switch such a form that the line is in
the area that stands out. (FIG. 1)
•
The model F-50-A have an independent start switch for the feeder,
at the right top of the machine.
GB
FIG.
1