5
5
5
Hardware Installation
Your monitor is equipped with an automatic power supply with a voltage
range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz. Make sure
that your local power supply is within the supported range. If you are
unsure, please contact your electricity supplier.
To install your Diamond View DV154 monitor:
1. Make sure that the power to the computer and the power to the monitor
are both turned off.
2. Connect the blue connector of the monitor’s D-sub cable to the VGA
output of the computer‘s graphics card.
3. Connect the stereo audio cable from the monitor’s audio jack to the
audio output of your computer’s sound card.
4. Connect the power cord from the monitor’s power jack to an AC power
socket. Please make sure, that you have easy access to the power
socket so you can disconnect the unit from the power socket should
you need to.
Signal cable
Audio cable
Power Cord
