Diamond Systems Ziggy, Руководство пользователя

Страница: 9 / 25

Ziggy User Manual Rev 1.0
www.diamondsystems.com
Page 9
SAM microcontroller is interfaced to the Jetson Module via SPI interface. An EEPROM is connected to the
controller for storing the calibration values of ADC/DAC.
3.1.11 Connectivity
Jetson module supports WLAN/Bluetooth integrated with Male I-PEX antenna connectors for WLAN/ BT are
located on the module.
WLAN:

2x2 MIMO

802.11ac compliant (backwards compatible with legacy 802.11b/g/a/n devices)
Bluetooth:

Bluetooth 4.1 ready (can connect to Bluetooth 4.1 enabled devices)

HIDP

Audio
– A2DP (advanced audio distribution profile)

RFKILL
The board supports socket for plugging the Skywire LTE CAT1 module from NimbeLink. 2x10 socket is provided
on the board with USB and UART to support the LTE module.
3.1.12 LED Indicators
The board provides the following LED indicators. All LEDs are located near to board edge or their respective
features. All LEDs are labeled in silkscreen with their function.
Power In: Green LED for Power IN
Power Good Green LED for Power Good indication.
Host LED Green LED to indicate Module is booted successfully
Ethernet: Green LED for Link, activity, and speed for each port
User LED Green LED for DAQ activity