Elton User Manual Rev 1.04
Page 46
NOTE
: The sequence of images represented in this section have been captured from the Linux Host PC.
4. Download the Elton baseboard Image file
elton-release-0.1-20190627.tar.gz
file, from
the FTP (File Transfer Protocol) site and copy it to the Linux Host Machine.
Figure 13.1-2: Elton Release Image File Displayed on Screen
To unzip the copied Image file:
5. Type and
Enter
the following command depicted in the Screen below. It may take a few minutes
for the file to unzip.
sudo tar -pxvf elton-release-0.1-20190627.tar.gz
NOTE
: The
tar.gz
file name is liable to change according to the version and release date.
Figure 13.1-3: Image File to be Extracted Screen
To switch to the directory where the file has been extracted:
6. Type and
Enter
the following command as depicted in the Screen below.
cd Linux_for_Tegra
Figure 13.1-4: Image File Switch Directory Command Screen
To verify the baseboard is in Recovery Mode, in the Host PC running Ubuntu Operating System version
16.04 Terminal:
7. Type and
Enter
lsusb.
