Diamond Products CSH24, Руководство оператора

Страница: 40 / 52

Servicing
Tensioning the diamond chain
Fig. 8-1 Tensioning the diamond chain
Proceed as follows:
To tension the diamond chain you will need the wrench
supplied with the
CSH24
.
• Loosen both nuts (1)
• Adjust the adjusting screw (2) for the correct chain tension
• Tighten both nuts (1)
Correct chain tension
1.
The chain tension is correctly set if, in the middle of the bar, with a
moderate pull the chain can be pulled away from the bar by a maximum
of
1/4"
.
2. The chain must be able to be pulled around the bar by hand once
tensioned.
Fig. 8-2 Chain tension
1
2
1/4"
2.
1.
40