MAINTANING THE CC7574
Engine
WARNING
•
Let the engine cool down prior to
servicing the saw.
•
DO NOT service the saw with the
engine running (unless stated otherwise).
Refer to the engine manual and manufacturer
for a full engine maintenance schedule and
additional engine maintenance information
.
Cleaning the Engine
Clean and wipe down the engine’s exterior, fans,
and guards daily to prevent high operating
temperatures.
Changing Engine Oil
•
Refer to Engine Operators manual for oil
specifications and capacities.
•
Change the oil after the first 50 hours of
operation, then every 500 hours afterward.
•
If the annual operating hours are less than 500,
change the oil every year.
•
The oil filter should be changed when the oil is
changed.
•
Refer to Engine Manual for Oil Filter
Specifications.
Oil Drain Hose
1. Remove Hydraulic lift pump cover.
2. Remove oil drain hose from behind lift
pump.
3. Level saw frame and place drain pan
beneath drain hose.
Oil Drain Valve
4. Remove red plastic drain plug and open
drain valve on side of oil pan.
5. Drain oil completely and dispose of
according to city, state and federal
regulations.
6. Shut oil drain valve and replace red plastic
drain plug.
7. Return oil drain hose to original position on
engine side of the lift pump.
8.
Replace hydraulic pump cover and
retighten.
Air Cleaner
Restriction Indicator
Restriction Indicator
•
Service the air filters when the restriction
indicator turns red.
•
Press the restriction indicator reset button on
the top of the indicator to reset the unit after the
air filters has been serviced.
53