Diamond Products CC125BXL-EE6, Руководство оператора

Страница: 34 / 44

MAINTENANCE
8. Snap the inner retaining ring into place on
the rear axle shaft to secure the middle
wheel.
9. Place a new wheel onto each end of the
axle.
10. Snap the retaining ring for each outer
wheel into place on the axle to secure both
wheels.
11. Reinstall the cable to the axle weldment
and tighten the cable nut to secure.
12. Reinsert the cable into the cable pivot pin
and tighten the setscrew to secure.
13. Fit and align the axle weldment underneath
the frame.
14. Replace and tighten the two bolts and
associated washers through the frame into
each end of the rear wheel shaft.
Lifting and Transporting
Lifting
CAUTION
Always use a strap to lift the machine.
Ensure the strap is rated high enough to
handle the load.
1. Ensure the work area is clear of any
obstructions and all personnel are at a safe
distance prior to lifting the machine.
2. Using a properly rated strap, place the
strap around the frame lift using a basket
style hitch.
3. Slowly lift the machine only high enough to
conduct the required work.
Transporting
Always secure the machine using tie down
straps to avoid damage during transport.
Storing
Complete the tasks listed below prior to storing
the saw for longer time frames:
• Lower the saw completely to remove strain
on the lifting mechanism.
• Clean and wipe down the saw to remove
dust and debris from saw components.
• Refer to the motor manual for all motor
recommendations prior to storing.
•
Store the saw in a dry area, protected from
outdoor elements and out of reach from
children.
Disposal
Dispose of the saw when it’s no longer
repairable, and/or contains safety hazards not
worth repairing or maintaining.
Transport the saw to a salvage yard or
recycling facility.
34