Assembly Diagram
Foldover Diagram
VSWR (nominal)
WARNING!
P
LEASE
R
EAD
B
EFORE
I
NSTALLATION
MOBILE ANTENNA: For ease of installation, DIAMOND ANTENNA MOBILE MOUNTS are strongly recommended. In
some cases, mobile mounts of different manufacturers’ may not interface well with DIAMOND Antennas. DIAMOND Mobile
antennas are pre-tuned to give best possible performance on the band(s) for which they are designed. In some installations,
minor VSWR adjustment may be made by moving the antenna up/down at the base end. Two set screws at the foldover hinge
allow for adjustment.
LARGE GVW TRUCK AND OFF ROAD VEHICLES: Due to the excessive vehicle vibration, antennas exceeding 45” are
not recommended. In any event, antennas damaged by excessive vibration are not covered by warranty. Any
tampering, cutting or attempted adjustment of this antenna beyond our recommendations may void all warranty. If you have
any questions, please call Diamond Customer Service Dept. at (760) 744-0900.
metric 1.5mm
allen wrench
#091101
upper whip element
set screws M4X3
#091102
lower whip element
set screws M4X3
#091103
foldover hinge
#091104
matching section
