Diamatic BMG-535, Руководство по эксплуатации

Страница: 37 / 90

MODEL BMG-535 GRINDER
SECTION 5
INITIAL OPERATION
36
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
•
Put the grinding machine and the filter unit onto the surface to be treated.
•
Attach the appropriate diamond tooling that is required for the particular
process. Please read Section 7 Maintenance of this manual.
•
Using the correct cables, connect the machine and the dust collector to
the electricity supply point. These electric supply points should be
protected and equipped with an Fl-switch. In case of doubt, ask the local
safety officer.
•
Check the extension cable for external damage.
•
Check the dust hose for damage.
•
Connect the grinding machine and the dust collector unit with the flexible
dust hose. Use hose clamps at the connections.
•
Make sure the dust bin of the dust collector unit is empty.
Before start-up, all operating personnel must be familiar with the
safety regulations given in this manual.
If problems with the BMG-535 arise during the assembly or start-
up, call a qualified person for help. Work on electrical
equipment
may only be undertaken by qualified personnel
.
Any machine, if it is not used according to the regulations, may
be hazardous to the operating, set-up and service personnel.
The equipment owner is responsible for compliance with the
safety regulations during operation and maintenance of safety
devices supplied with the machine as well as the provision of
appropriate additional safety devices.
5.1 PREPARATION FOR INITIAL OPERATION