DiamaPro Systems TVX-A Скачать руководство пользователя страница 2

1. INTRODUCTION

Thank you for purchasing a DIAMAPRO® SYSTEMS product.

This manual provides information and procedures to safely operate and 

maintain the TVX-A Vacuum. For your own safety and protection from 

injury, carefully read, understand, and observe the safety instructions 

described in this manual.

Keep this manual or a copy of it with the machine. If you lose this manual 

or need an additional copy, please contact DiamaPro Systems®. This

machine is designed and built with user safety in mind; however, it can 

present hazards if improperly operated and serviced. Please follow the 

operating instructions carefully. If there are any questions regarding oper-

ating or servicing of this machine, please contact DiamaPro Systems®.

Disclaimer: DiamaPro Systems® and its affiliates take no responsibility 

for any damage, injury or death resulting from the incorrect or unsafe use 

of this product. Use of this product should be undertaken by competent 

persons only. It is the operator’s responsibility to ensure that the following 

safety procedures are followed. If you are unsure, do not operate this 

product.

DiamaPro TVX model vacuums are warranted to be free from manufactur-

ing defects in normal service for a period of one or two years from the date 

of purchase by the original consumer purchaser. Component manufac-

turers offer separate warranty periods. Call 470-977-2323 for complete 

information.

DiamaPro System’s obligation under this warranty is expressly limited to 

the replacement of such part or parts as inspection shall disclose to have 

been defective.

This warranty does not apply to defects caused by damage, unreasonable 

use, faulty repairs made by others or defects caused by failure to provide 

reasonable maintenance.

Further, the warranty is void if the product, or any of its components, is 

altered or modified by the consumer or if the product is used in an inappro

-

priate manner or with equipment not recommended by the manufacturer.

Wear items are not covered under warranty: examples include: belts, 

wheels, casters, bearings, cart wheels, filters, wear pads, spark plugs, 

hoses, wands and squeegees, motors, etc.

To qualify for warranty coverage, DiamaPro TVX vacuums must be regis-

tered within 30 days of purchase. Registration can be completed online at 

www.DiamaProSystems.com.

To request your warranty service you MUST send a written request to:

DiamaPro Systems

3343 Peachtree Road NE

Suite 145 #24

Atlanta, GA 30326 

including the manufacturing details that can be found on a plate fitted 

inside your machine together with a copy of the invoice. 

The warranty is invalid under the following conditions:

• Improper use of the machine or total or partial failure to comply with the 

contents of this manual

• Any part of the vacuum cleaner is altered or modified in any way

• Incorrect electrical installation

• If the laws in the country of use are not respected

• Inadequate maintenance

• The machine has not undergone routine maintenance as specified in this 

manual

• Use of spare parts that are not produced by DiamaPro Systems® or not 

specifically indicated for the model in use 

• Partial or total failure to comply with the instructions given in this manual 

3. UNINTENDED USE

• Do not use the machine for sucking up liquid material

• Do not use the machine or expose the machine to water, rain, or rain like 

environments

• Do not use the machine with improper extension cords or extension cords 

of improper length

DUST WARNING

Cutting, especially when DRY cutting, generates dust that comes from the 

material being cut, which frequently contains silica.

Silica is a basic component of sand, quartz, brick clay, granite and numer-

ous other minerals and rocks. Exposure to excessive amount of such dust 

can cause:

■ Respiratory diseases (affecting your ability to breath), including chronic 

bronchitis, silicosis and pulmonary fibrosis from exposure to silica. 

These diseases may be fatal;

■ Skin irritation and rash; and

■ Cancer according to NTP* and IARC*

*National Toxicology Program, International Agency for Research on Cancer

Take precautionary steps

■ Avoid inhalation of and skin contact with dust, mist and fumes;

■ Wet cut when feasible, to minimize dust;

■ Wear and ensure that all bystanders wear appropriate respiratory protec

-

tion such as dust masks designed to filter out microscopic particles. (See 

OSHA 29 CFR Part 1910.1200)

PROPOSITION 65 WARNING

2. WARRANTY

California Prop 65 Warning: Use of this product can cause exposure to ma-

terials known to the State of California to cause cancer and/or birth defects 

or other reproductive harm.

Содержание TVX-A












Отзывы: