OWNER’S MANUA
L
DUAL PUMP
DUAL COMPONENT POLYMER PUMP
INSTRUCTION MANUAL
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Страница 1: ...OWNER S MANUAL DUAL PUMP DUAL COMPONENT POLYMER PUMP INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE ...
Страница 2: ...dy for use Dispensing Filler 1 Prior to filing tanks premix the Part A Polyol gray component 2 Ensure that Part A material is placed in Part A tank and Part B material is placed in Part B tank DO NOT CROSS CON TAMINATE It is advised to keep the lid on the tank that is not being filled 3 After filling tanks dispense polyurea through manifold assembly watching flow An errant stream out of one or both si...
Страница 3: ...e static mixing element should be done approximately every 45 seconds with most M M products 2 Material STOPS flowing A Check main power supply to ensure voltage is entering the speed con trol unit Inside the control box cover located on the face of the circuit board a GREEN LED light should be illumi nated when proper voltage is present If indicator light is off switch is on check main power supply...
Страница 4: ...www diamaprosystems com 404 834 1162 ...