background image

DUST WARNING

Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which 

frequently contains silica. When dry cutting, be sure to use a HEPA filtered dust collector. 

Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Exposure to 

excessive amount of such dust can cause:

n

 Respiratory diseases (affecting your ability to breath), including chronic bronchitis, silicosis and pulmonary fibrosis 

from exposure to silica. These diseases may be fatal;

n

 Skin irritation and rash; and

n

 Cancer according to NTP* and IARC*

*National Toxicology Program, International Agency for Research on Cancer

Take precautionary steps

n

 Avoid inhalation of and skin contact with dust, mist and fumes;

n

 Wet cut when feasible, to minimize dust;

n

 Wear and ensure that all bystanders wear appropriate respiratory protection such as dust masks designed to filter 

out microscopic particles. (See OSHA 29 CFR Part 1910.1200)

California Prop 65 Warning: 

Use of this product can cause exposure to materials known to the State of California 

to cause cancer and/or birth defects or other reproductive harm.

Содержание DP-JSX-4.5









Отзывы: