Transporting the AS-500
AS-500 should be transported vertically or horizontally on the appropriate feet located on the bottom
of the unit or opposite the handle.
Electrical Requirements
particulate. Due to the presence of GFCI receptacle, the AS-500 model must be plugged directly into
a wall outlet. No extension cords should be used.
Air Ducting
A. Inlet Ducting
-
tached to the unit inlet. It connects by placing the wire in the duct over the duct collar lip at one loca-
tion and working over it over the lip gradually. It may be removed after use for easier transport and
storage.
B. Outlet Ducting
to be attached to the AS-500 outlet. To attach ducting to the collar, remove the ring from the unit by
pressing release tab at the top of the grill. Put the plastic duct end through the inside of the ring. Roll
the duct end outward so that it over-laps the outside of the ring. Clip the ring back onto the exhaust
grill.
C. Negative Air Ducting
space, the space will be under a slight negative pressure. This will help prevent airborne particles
from leaving the space, because the negative pressure will draw air in through openings in the
space's exterior surfaces.
