Eiconcard™ Family Installation Guide
page 45
PT:
Dialogic declara que este ITE está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
SL:
Dialogic izjavlja, da je ta ITE v skladu z bistvenimi zahtevami in ostalimi
relevantnimi doloèili direktive 1999/5/ES.
SK:
Dialogic týmto vyhlasuje, že ITE spåòa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
SV:
Härmed intygar Dialogic att denna ITE står l överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
A detailed R&TTE Declaration for this product can be found at:
http://www.dialogic.com/declarations
Safety status: SELV
No voltages within this equipment exceed SELV voltages. All interconnection points
and ports are SELV.
User/Installer instructions for the United Kingdom
Important Safety Considerations When Installing Into A Host Computer System
The Eiconcard is a single PCI card.
Installation Within A Spare Slot Position
Warning:
It is essential that, when other option cards are introduced
which use or generate a hazardous voltage, the minimum creepages and
clearances specified in the table below are maintained. Suitable user
protection to ensure compliance with EN60950/A4 should be present on
the card. A hazardous voltage is one which exceeds 42.4V peak a.c or 60V
d.c. If you have any doubt, seek advice from a competent engineer before
installing other adapters into the host equipment.
The equipment must be installed such that with the exception of the
connections to the host, clearance and creepage distances shown in the
table below are maintained between the card and any other assemblies
which use or generate a voltage shown in the table below.
Table 10. Creepage Distances
The larger distance shown in parentheses applies where the local environment within
the host is subject to conductive pollution or dry non-conductive pollution which could
become conductive due to condensation. Failure to maintain these minimum distances
would invalidate the approval.
The clearance distance X is the shortest distance in air between two points. The
creepage path Y (along surfaces) is the shortest distance between the same two
points.
Clearance
X mm
Creepage
Y mm
Voltage used or generated
by other parts of the host or
expansion card Vrms or Vdc
2.0
2.4 (3.8)
up to 50
2.6
3.0 (4.8)
up to 125
4.0
5.0 (8.0)
up to 250
4.0
6.4 (10.0)
up to 300
64-0308-09.fm Page 45 Monday, March 15, 2010 3:32 PM
